Squeegee Rubber | The screen printing manufacturer, NEWLONG SEIMITSU KOGYO

Sold in 10mm increments depending on the length you need.

This is an eco-friendly squeegee that does not waste material.
It also has excellent oil resistance.

　　L = 50 to 1,950 mm (sold in 10 mm increments)

A standard squeegee with high abrasiveness.

Excellent effect on polar solvents.
If you have trouble with this kind of printing, please try it once.

　　　　　　　L=750 or 1500mm

It is possible to attach the attack angle to 45 degrees or less.
It has the optimum shape when you want to increase the amount of ink applied.

Like the square squeegee, it can be mounted at an attack angle of 45 degrees.
It can also be used to scrape ink from under the plate or as a scraper.

By using high hardness urethane as the core

It has better straightness than conventional squeegees.

Therefore, it is possible to maintain a stable attack angle.

This leads to improved uniformity of printed film thickness.

Since the core is urethane, it can be cut with a rubber cutter.

You can easily adjust the length.

The rubber is very strong because it is reinforced with glass epoxy.

Recommended for printing using high viscosity pastes.

Squeegee for metal mask.
The optimal curved tip shape ensures smooth printing.

This makes the rolling of the paste very good.

J Squeegee (ROLL-J type)					Solidity	Color
	Solidity	Color	1000mm×5(1set) *Additional charge for the holder is added.
		-	1000mm×5(1set) *Additional charge for the holder is added.	Clear

The best hand cutter for squeegee cutting.