Fully automatic from washing to drying
Plate cleaning device ACT series
Necessary plate cleaning after printing.
This task is time-consuming if done manually.
Improve efficiency with the ACT series.
Introduction video
ACT-200M basic specifications
Body dimensions | W950 x D1350 x H1800 |
weight | Approximately 500kg |
Screen Frame size | MAX 800×750mm |
cleaning area | MAX570×500mm |
cleaning time | 4 minutes |
Draining time | 1 minutes |
Drying time | 10 minutes |
Automate plate cleaning
- Damage to the plate can be reduced because the cleaning solution is not applied to areas other than the areas to be cleaned.
- After the plate is installed, cleaning and drying are performed internally, so there is no leakage of cleaning fluid or odor.
- We use cleaning liquids that have no flash point and are harmless to humans and the atmosphere.
- Other machines in the series can handle various plate sizes.
