Move to the text

Squeegee Rubber

Creation of future with customers

Squeegee Rubber

E Fine squeegee << new ≫
Size
Hardness
Color
60 °
Green
70 °
White
80 °
Blue
90 °
Red
60 °
Green
70 °
White
80 °
Blue
90 °
Red
L=cut per 10mm
 
Newlong provides this squeegee cut for desirable
length(minimum length is 50 mm and the cutting unit
is 10 mm). This is environmentally friendly squeegee
which does not waste itself. And, this is also excellently
oil-tolerant squeegee.
New Super Urethane Rubber Squeegee
Size
Hardness
Color
60°
Green
70°
White
80°
Orange
60°
Green
70°
White
80°
Orange
This squeegee has high abradability.
This is very standard squeegee.
PS squeegee
Size
Hardness
Color
70°
Green
80°
L=cut per 750 or 1500mm
 
This squeegee is effective when you print
with polar solvent.
Diamond Squeegee
Size
Hardness
Color
60°
Green
70°
White
80°
Natural
75°
Yellow
90°
Blue
This squeegee enables to set squeegee angle under 45 degrees. This is excellent when you want apply much ink.
Sword Squeegee
Size
Hardness
Color
75°
Green
60°
Clear
70°
80°
This squeege enables to set squeegee angle under45 degrees. This is also used to clean bottom side of screen and used instead of scraper.
BNG Squeegee
Size
Hardness
Color
70°
Clear
80°
I can put on an attack angle to 45 degrees like a corner squeegee.
As a substitute for movement and sukureppa puddling ink again from the bottom of the version
I may be used.
J Squeegee (ROLL-J type)
Hardness
Color
1,000mm×5 (1set)
※ Holder is an extra charge.
Clear
This is squeegee mainly used with metal mask.
Curving edge makes rolling of ink well during printing.
Hand Cutter
 
This is the hand cutter suitable for squeegee cutting.
Back to TOP